Problem with Decal Application

My decal is stretching and distorting  Apply more water to the model or decal may need to be soaked longer.

My decal is not laying over rivets or other details Let the decal dry after application (it will contour slightly) after the decal has had a little time to dry apply a coat of MicroSol or Solvaset.

My decal has silver spots after application Poke the spots with a sharp X-Acto knife, apply a coat of Solvaset or MicroSol (repeat as necessary).

My decal has white marks / halo around it Ensure you are using clean distilled water; city water contains minerals that may leave white halos and such marks.

My decal takes longer than 30 seconds to remove from the paper Ensure you are not using cold water; it is best to use warm distilled water around 80-85 degrees.

Using Decal Setting Solutions Before applying any decal setting solutions, ensure your model has been coated with a gloss finish. The closer to an automotive gloss finish the better. Cut the decal, dip in warm water and slide the decal off the backing int ...